100mm
Submersible Slurry Pump

An extremely portable and versatile pump, the Goodwin 100mm submersible slurry pump is the most popular pump in the Goodwin range.
Ideal for tank cleaning, sump pumping, emergency clean-up or replacing unreliable vertical spindle pumps.
Available in 3 wet end configurations to suit any pumping problem, the pump uses a 3Ph, 30kW motor, and can be supplied for voltages ranging from 380V to 1000V.
Note: NZE not available for a 60Hz supply.
Pump Overview Video
100mm | NZE | ANZE | HNZB |
Max Solid Content | 65% | 65% | 25% |
Max Specific Gravity Kg/L | 2.8 | 2.8 | 1.5 |
Max Particle Size | 25mm | 32mm | 12mm |
Max Slurry Temperature | 90°C | 90°C | 90°C |
Max Flow m³/hr (Ltrs/Sec) | 137 (38) | 220 (62) | 160 (45) |
Max Head (Pressure Bar) | 33m (3.2) | 38m (3.7) | 60m (5.9) |
Max Submergence Depth | 28m | 28m | 28m |
Downloads
Brochures and Technical Data Sheets for this product range can be found on our ‘Technical’ page.
50Hz 100mm Submersible Slurry Pumps
-
50Hz 22kW 100mm NZE
(1.5MB PDF)
-
50Hz 30kW 100mm NZE
(1.5MB PDF)
-
50Hz 100mm ANZE
(1.3MB PDF)
-
50Hz 100mm HNZB
(3.5MB PDF)
60Hz 100mm Submersible Slurry Pumps
-
60Hz 100mm ANZE
(3.5MB PDF)
-
60Hz 100mm HNZB
(1.4MB PDF)
Other Products in the Submersible Pumps Range
Equipped with a 90kw motor, the Goodwin 150mm pump is the newest addition to our range of slurry pumps.
Created to pump high volumes of dense slurry, the Goodwin 200mm slurry pump is equipped with a 112kw motor for the toughest pumping problems.
The Goodwin SlurryChamp hydraulic submersible pump has been developed to give maximum reliability, strength and endurance using hydraulic power.
The DWHH pump is designed for lightweight slurry or dirty water (up to 10% solids content).
Designed for pumping corrosive slurry, the Goodwin Super Duplex Stainless Steel “SDSS” ANZE 100mm pump is constructed from the highest quality alloys to extend lifetime.