100mm Hydraulic Excavator Pump
The Goodwin SlurryChamp® 100mm hydraulic submersible pump has been designed to give maximum reliability, strength and endurance using hydraulic power.
The Goodwin SlurryChamp hydraulic pump can be mounted on any excavator arm using the mounting frame. The special basket stand assists with excavator dredging operations.
Product Images
Downloads
Brochures and Technical Data Sheets for this product range can be found on our ‘Technical’ page.
Performance Data
| Maximum fluid SG | 2.8 kg/l |
| Maximum fluid solids content | 65% by weight |
| Maximum particle size | 32 mm |
| Maximum fluid temperature | 90 °C |
| Recommended pH range | 4-10 |
| Weight | 403 kg |
| Outlet diameter | 100 mm |
| Maximum flow | 230 m3/hr @ 1500rpm |
| Maximum head | 51 m (5.0 bar) @ 1800rpm |
| Impeller diameter | 320 mm |
| Impeller tip speed | 24 m/s @ 1500rpm |
| Peak efficiency | 62 % |
| Maximum submergence depth* | 28 m |
| Motor displacement | 63cc |
| Speed range | 1200 - 1800rpm |
| *As standard, can be deeper if required. | |
Other Products in the Submersible Pumps Range
An extremely portable and versatile pump, the Goodwin 100mm submersible slurry pump is the most popular pump in the Goodwin range.
Equipped with a 90kw motor, the Goodwin 150mm pump is the newest addition to our range of slurry pumps.
Created to pump high volumes of dense slurry, the Goodwin 200mm slurry pump is equipped with a 112kw motor for the toughest pumping problems.
The DWHH pump is designed for lightweight slurry or dirty water (up to 10% solids content).
Designed for pumping corrosive slurry, the Goodwin Super Duplex Stainless Steel “SDSS” ANZE 100mm pump is constructed from the highest quality alloys to extend lifetime.
