200mm
Submersible Slurry Pump
Designed for pumping high volumes of dense slurry, the Goodwin 200mm slurry pump is equipped with a 112kW motor for the toughest pumping problems.
Ideal for dredging mine tailings and hydro mining, and reliably handling slurry at large mineral processing operations, the Goodwin 200mm pump has proved its capabilities time and time again.
With tungsten carbide coated wear parts as standard, the Goodwin 200mm submersible slurry pump is our ultimate slurry pumping solution. The pump uses a 3Ph, 112kW motor and is available for voltages ranging from 380V to 1000V.
Note: NZE not available for a 60Hz supply.
Pump Overview Video
| 200mm | NZE | ANZE | HNZB |
| Max Solid Content | 65% | 65% | 40% |
| Max Specific Gravity Kg/L | 2.5 | 2.1 | 1.5 |
| Max Particle Size | 76mm | 76mm | 40mm |
| Max Slurry Temperature | 90°C | 90°C | 90°C |
| Max Flow m³/hr (Ltrs/Sec) | 600 (170) | 800 (220) | 800 (220) |
| Max Head (Pressure Bar) | 27m (2.6) | 40m (3.9) | 53m (5.2) |
| Max Submergence Depth | 28m | 28m | 28m |
Downloads
Brochures and Technical Data Sheets for this product range can be found on our ‘Technical’ page.
Other Products in the Submersible Pumps Range
An extremely portable and versatile pump, the Goodwin 100mm submersible slurry pump is the most popular pump in the Goodwin range.
Equipped with a 90kW motor, the Goodwin 150mm pump is the latest addition to our range of submersible slurry pumps.
The Goodwin SlurryChamp hydraulic submersible pump has been developed to give maximum reliability, strength and endurance using hydraulic power.
The DWHH pump is designed for lightweight slurry or dirty water (up to 10% solids content).
Designed for pumping corrosive slurry, the Goodwin Super Duplex Stainless Steel “SDSS” ANZE 100mm pump is constructed from the highest quality alloys to extend lifetime.